Software One
Interface Software for the Valentine OneTM Radar Detector.
NOTICE: This software was one of my projects from back in 2005. Though it was really cool back then, it is now obsolete, and interface cables are no longer available for purchase. Modern Valentine One radar detectors now have a much more advanced communication interface called "ESP", this software only supported the legacy protocol.
For more information about ESP, visit the Valentine One website:
http://www.valentine1.com/v1info/ESP/"
***** WARNING: Use of this software and information is at your OWN RISK!!! *****
I am not affiliated with Valentine Research!
(Click for larger image)
More Screenshots
The Valentine OneTM is a directional field strength indicator for the 1.5cm, 2cm, 3cm, 8mm, and 800-900 nm bands, designed by Mike Valentine, W8MM. More commonly known as a radar detector.
If you are unfamiliar with the Valentine OneTM, visit http://www.valentineone.com
Software Features:
- Connect to the Valentine OneTM Radar detector via serial or USB port
- Emulate the remote display unit
- Log radar alert data to a PC file
Software One might be useful for:
- Users of in-vehicle PC's
- Evaluating detector performance
- Evaluating the effect of different settings in the Valentine OneTM programming
- Evaluating radar sources over a driving route
To use Software One, you'll need an interface cable to connect from your PC to the Valentine One'sTM accessory port.
Download Software One Version 1.2.2
"Valentine One" and "V1" are trademarks of Valentine Research, Inc.
If you use and appreciate my free software and would like to make a donation, you can do so through PayPal. Donations are by no means required, but they are appreciated.
Jim Mitchell
KC8UNJ
